top of page

PERFORMANCE

IEK-homepage.png

= temperature BEFORE HOT WATER

= temperature AFTER

VVX

Despite large temperature differences in the outdoor air, the temperature after the heat exchanger never exceeds more than 22 degrees.

INDIRECT EVAPORATIVE COOLING

  • At UL temperatures up to 19-21 degrees, the unit's ByPass function is used, which gives low SFP numbers. At UL temperatures from about 21 degrees and above, the Indirect Evaporative cooling is activated.

  • The warmer it is outside, the higher the performance (cooling effect).

  • ClimateMachines™ Indirect Evaporative Cooling guarantees a TL temperature (without post-treatment) throughout the summer period of between 18-22 degrees.

We largely sell our units on verified performance. Being constantly live connected to our units not only gives us the opportunity to verify the units' performance but also helps our customers optimize a facility and get invaluable feedback so that ClimateMachines™ can constantly develop and improve.

To verify and optimize the performance of our units, we use our monitoring program ControlMachines™.

HIGH EFFICIENCY THROUGHOUT THE WINTER SEASON

Climate Machines delivers promised performance throughout the season regardless of outdoor temperatures

Thanks to the properties of the plastic, the anti-freeze function kicks in at very low temperatures. The exhaust air is allowed to drop as low as -10 degrees before the function is activated.

performance.png
bottom of page